EVA Hot Melt

EVA hot melt

EVA hot melt adhesive is a versatile and widely used bonding solution known for its ease of application, quick setting time, and strong bond strength. 

Characteristic of EVA Hot Melt Adhesive

The product combines the characteristics of long time and wide operating temperature range, and is suitable for various automatic contour edge bonding machines and manual edge bonding machines. High cost performance coating adhesive, the product can be used for UV paint. All raw materials comply with FFA regulations 21CFR175 105 "adhesive

Technical Date of EVA Hot Melt Adhesive

Appearance: Light yellow transparent small particles

Viscosity 5000-1000 cps (180 ℃)

Toxicity None

Density 1.05g/cm3

Globe softening point 78-88 ℃

Standard packaging 25 kg/bag

Store in a dry, cool place below 40 º C for a period of 24 months. When the ambient temperature reaches 60~70 º C, the colloid will soften.

Note:

If the machine is shut down for more than 2 hours, the temperature of the glue box should be lowered to avoid aging of the hot melt adhesive and affecting the bonding effect; If the machine is shut down for more than 8 hours, apply or empty the hot melt glue  in the glue box

The process parameters listed in the manual are only obtained based on experience and test data, and are for reference only. The actual process parameters should be determined based on production conditions. Due to the inability to fully control the actual production conditions of the glue users, our company cannot bear any risks and responsibilities arising from the improper use of our glue.